SUZHOU SANAO ELECTRONICS CO.,LTD.

Multi core cutting and stripping machine

Short Description:

Model : SA-810N

SA-810N is automatic cutting and stripping machine for sheathed cable. Processing wire range: 0.1-10mm² single wire and 7.5 outer diameter of sheathed cable , This machine adopts the wheel feeding ,Turn on the inner core stripping function, you can strip the outer sheath and core wire at the same time. also can stripping electronic wire below 10mm2 if you turn off the inner core stripping , this machine has a lifting wheel function, so the outer outer jacketer stripping length of the front can be up to 0-500mm, the back end of the 0-90mm, the inner core stripping length of 0-30mm.

 


Product Detail

Product Tags

Product Video

Product Introduction

SA-810N is automatic cutting and stripping machine for sheathed cable.

Processing wire range: Outer diameter is less 7.5mm Sheathed cable and 10mm2 electronic wire , SA-810N Multi core sheathed cable stripping machine ,can stripping outer jacket and inner core at one time , It’s adopted Four wheel feeding and English display that it’s more Easier to operate than the keypad model.

Machine with double lifting wheel function, the wheel can be automatically lifted up in the stripping time, so as to reduce the wheel on the outer skin of the damage, also increase the length of the outer jacket stripping length , Not only can stripping the sheath wire,but also can strip the electronic wire, when stripping electronic wire, such as do not need to lift the wheel function, you can click on the screen to turn off.

 

Advantage

1. English Color Screen: Easy to operate , Directly setting cutting length and stripping length .
2. High speed :Two cable processed at the same time;It’s Greatly Improved stripping speed and save labor cost .
3. Motor: Copper core stepper motor with high precision, low noise and longer service life.
4. Four-wheel driving: Machine is equipped with two sets of wheels as standard, rubber wheels and iron wheels. The rubber wheels can’t damage the wire, and the iron wheels are more durable

Product Parameters

Model SA-810N ( wheel feeding )
Product Name  Multi core cutting and stripping machine
electronic wire/ single wire 0.1-10mm2
Sheathed cable Outer diameter is less 7.5mm
Stripping length Outer jacketer  Front end 0-500mm Rear end 0-90mm
Stripping length Inner core 0-30MM
Conduit 4/5/6/8
Power supply 220V~50-60Hz ( 110V can custom made )
Operation page 4.3-inch touch screen display
Capacity About 1300 Pcs /hour (depending on the Cutting length )
Cutting tolerance 0.002*L-MM( No error within 1M)
Dimension L460mm*W480mm*H330mm (excluding protrusions
Weight 35kg

  • Previous:
  • Next:

  • Write your message here and send it to us